Editing Marker Values; Clearing Markers - Roland VS-1680 User Manual

24-bit digital studio
Hide thumbs Also See for VS-1680:
Table of Contents

Advertisement

Editing Marker Values

1. Move to the marker you want to change. Hold [SHIFT]
and press [PREVIOUS] or [NEXT] to move to the marker.
2. Hold [SHIFT] and press [F6 (UTILITY)]. The Utility
menu icon appears in the display. If it is not displayed,
press [F6 (EXIT)].
fig.02-08b
Marker Number
Time
Measure Beat
When saving Auto Mixes
When setting track number Markers
3. Press [F1 (Mark)]. If "Mark" does not appear above [F1],
press [PAGE] until "Mark" is displayed, and then press
[F1 (Mark)].
4. Each marker is shown. Use [
[
] to move the cursor to the marker you want to
change. If no value is stored for a marker, "—-:-h-m-s-f-
—-" appears in the display.
5. Use the TIME / VALUE dial to modify the value of the
marker. The time of a marker can only be modified
within the range between the preceding and following
markers.
fig.02-09
0
1
1
Possible range of change
6. When you finish changing settings, press [F6 (EXIT)] to
return to the Utility menu. Or, press [PLAY (DISPLAY)]
to return to the Playlist display.

Clearing Markers

Setting markers makes it much easier to get to different
places within a song, but having too many markers can make
it more difficult. Delete unneeded markers whenever you
can.
Status
], [
], [
], and
1
2
Time
Chapter 3 Playback Operations
Clearing Specific Markers
1. Move to the marker you wish to delete by holding
[SHIFT] and press [PREVIOUS] or [NEXT].
2. Hold [CLEAR] and press [TAP]. The marker is cleared.
fig.02-10a
CLEAR
+
BACK
SPACE
0
1
2
Before deleting a Marker
fig.02-10
0
1
After deleting a Mark point
Clearing All Markers
1. Hold down [SHIFT], [CLEAR] and [TAP] at the same
time.
fig.02-11a
SHIFT
CLEAR
+
BACK
SPACE
0
1
2
Before deleting all Markers
fig.02-11
After deleting all Markers
2. "Clear ALL Tap Markers?" appears in the display.
Press [YES] if you want to clear all markers. If you want to
cancel the procedure, press [NO].
This procedure will erase any existing Automix data and/or
CD indexes.
TAP
3
4
Time
2
3
Time
TAP
+
3
4
Time
Time
47

Advertisement

Table of Contents
loading

Table of Contents