Adjusting The Panning Of Stereo Linked Channels; Linking The Faders Of Two Or More Channels (Fader Group) - Roland VS-1680 User Manual

Chapter 5 Using the Digital Mixer
2. Press [F5 (Fader)]. If "Fader" does not appear above [F5],
press [PAGE] until you see "Fader" above [F5], and then
press [F5 (Fader)].
3. Press [F6 (PRM.V)]. The values of each fader appear in
the display.
4. Use [
], [ ], [
cursor. Then use the TIME/VALUE dial to adjust each
setting.
fig.11-21
channel
Even-Numbered Channel Level
Total Level
Odd-Numbered Channel Level
Total Level
This adjusts the total volume level (0-127). Use the fader
for the odd-numbered channel to change this setting.
Odd-Numbered Channel Level
This adjusts the total volume level (0-127) of the odd-
numbered (left) channel.
Even-Numbered Channel Level
This adjusts the total volume level (0-127) of the even-
numbered (right) channel.
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
Adjusting the Panning of Stereo
Linked Channels
When Stereo Link is on, it is possible to adjust the channels'
overall stereo position while preserving their pan positions
relative to each other. If you want to adjust the pan for each
channel independently, use the following procedure.
1. Press the SELECT button for the input or track channel
that is linked.
2. Press [F1 (MIX)]. If "MIX" does not appear above [F1],
press [PAGE] until you see "MIX" above [F1], and then
press [F1 (MIX)].
3. Press [F6 (PRM.V)]. Each of the pan positions appears in
the display.
78
], and [ ] to move the
4. Use [
], [ ], [
cursor. Then use the TIME/VALUE dial to adjust each
setting.
fig.11-22
Channel
Even-Numbered Channel Pan
Total Balance
Odd-Numbered Channel Pan
Mix Assign Switch
When this is set to "On", the source at each Input
channel is assigned directly to the MIX bus. Set this to
"on" when you simply want to mix an input without
actually recording it.
Total Balance
With the balance between both channels preserved, this
adjusts the total left-right balance (L63-R63).
Odd-Numbered Channel Pan
This adjusts the balance (L63-R63) of the odd-numbered
(left) channel.
Even Numbered Channel Pan
This adjusts the balance (L63-R63) of the even-numbered
(right) channel.
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
Linking the Faders of Two or
More Channels (Fader Group)
The faders of two or more channels (inputs/tracks) can be
assigned to groups, so that when the fader of any channel is
operated, the fader levels (volume levels) of all channels in
that group will be adjusted as well.
When fader group settings have been made, you can adjust
the overall volume of a group while preserving the volume
balance of the channels included in that group.
], and [ ] to move the