The Recording And Mixing Process - Roland VS-1680 User Manual

24-bit digital studio
Hide thumbs Also See for VS-1680:
Table of Contents

Advertisement

Chapter 4 Recording Operations
Song Numbers
On the VS-1680, every song is assigned a number. Newly
created songs are given the lowest available number. For
example, if there are five songs on the hard drive, the
next song created will be assigned Song Number 6. If
Song Number Three is deleted, the remaining songs will
be numbered 1, 2, 4, 5, and 6. The next new song created
will be assigned Song Number 3.
fig.03-03
If song numbers up to 5 are occupied
Disk Drive
InitSong 001
InitSong 002
InitSong 003
Song New
InitSong 004
InitSong 005
If Song 3 is deleted
Disk Drive
InitSong 001
InitSong 002
Song New
InitSong 004
InitSong 005

The Recording and Mixing Process

The recording procedure with the VS-1680 is similar to the process of recording with traditional multitrack recorders. The general
process of recording a song is outlined below.
1. Connect instruments and microphones to the VS-1680.
2. Record the basic rhythm tracks (i.e. drums, bass, etc.).
3. Record the other parts (electric guitars, synthesizers, vocals, etc.) while playing back the basic rhythm tracks.
4. If there are any mistakes in the process, record over the places where they occurred using punch-in and punch out.
54
Disk Drive
InitSong 001
InitSong 002
InitSong 003
InitSong 004
InitSong 005
InitSong 006
Disk Drive
InitSong 001
InitSong 002
InitSong 003
InitSong 004
InitSong 005

Advertisement

Table of Contents
loading

Table of Contents