Operation; Tone Selection; Basic Operation - Roland 3000S Owner's Manual

[2] OPERATION
1. Basic Operation
@ Turn the piano on.
* For about 2 seconds after turned on, the piano
cannot be played because of the muting circuit.
(à Adjust the volume with the Volume Knob ©.
<HP-3000S>
Minimum volume Maximum
MIN MAX
<HP-4500S/5500S/5600S >
VOLUME
e e
MN — MAX
2. Tone Selection
The Roland Piano features 8 keyboard sounds;
two acoustic grand pianos, electric grand piano,
harpsichord, clavi, vibraphone and two electric
pianos. To select one of these voices, press one
of the Tone Selector buttons numbered 1 through
8. One keyboard sound can be selected at a time.
PIANO. HARPSI- VIBRA- E.PIANO
1 2 3 CHORD CLAVE PHONE 1 2
ЕЕРЕЕ ЕЕЕ
1 2 3 4 5 6 7 B
VOICE PRESERVE FUNCTION
The Roland Piano features the Voice Preserve
Function, that is, while you are playing the key-
board using a certain tone color, you can request
the next tone color to be used, without the tone
actually changing until you release all the keys.
When the piano is being played with the Note or
Damper ON, the tone color does not change. (the
indicator of the corresponding sound flashes.) To
change the voices, lift all Notes and the Damper
OFF. (Now, the indicator of the new voice is con-
stantly lighted.)