Track Insert - Roland VS-1680 User Manual

Chapter 10 Track and Phrase Editing
fig.04-04
START (Start Point)
Specifies the start time of the segment to be copied.
END (End Point)
Specifies the end time of the segment to be copied.
FROM (From Point)
Specifies the reference position of the segment to be
copied, in relation to the TO point. Normally, this is set
as the same as the START point.
TO (To Point)
Specifies the time point the segment will be copied to.
Specifies the destination point.
+Insert
When this is set to "On," first a blank space is inserted at
the destination location (the To Point) that is equal in
length to the section of audio being copied. Then the
Track Copy is carried out.
fig.04-06
A
A'
Start End To
6. Press [F4 (Exec)]. This executes the Track Copy.
7. When Track Copy is completed correctly, "Complete"
appears in the display.
8. Press [PLAY (DISPLAY)] to return to the Playlist display.
If you are unhappy with the edit you made, press [UNDO].
"UNDO Level 1" will be displayed. Press [YES] to restore
your track(s) to their condition prior to the edit.
144
If you plan on using Track Copy to arrange sections of your
song, it is a good idea to use the metronome when you
record. Then you will be able to select sections of your song
for copying by using the measure and beat indicators.

Track Insert

This operation inserts blank space at the specified location.
fig.04-17
1. Hold [SHIFT] and press [F2 (TRACK)].
2. Make sure "Track Edit Menu" appears in the display. If it
does not, press [F1 (Tr/Ph)] once.
3. Press [F5 (Ins)] for Track Insert. If you don't see "Ins"
above [F5], press [PAGE] until "Insert" appears, and
then press [F5 (Ins)].
4. Press the Track SELECT button to select the tracks on
which you want to insert blank space. The SELECT
button stops blinking, indicating it is the track to be
edited.
Alternate method:
a. Press [F1 (SelTr)].
b. Press [
cursor to the track you want to insert on.
c. Press [F3 (MARK)].
e. If [F2 (All)] is pressed, all tracks are selected to be
inserted on.
Time
f. Press [F1 (Back)].
START TO
], [ ], [ ], and [
Time
] to move the