Roland VS-1680 User Manual page 114

Chapter 8 EZ Routing
6. Only the sources—Input Mixer Channels and Track Mixer Channels—you specified during Step 4 will be shown. Use [
[ ], [ ], and [
fig.02-26
7. Press [F2 (STEP ->)]. You can return to the previous screen by pressing [F1 (STEP<- )].
8. Make the settings for the effects. Use [
adjust each of the values. Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX B)] to make settings to
EFFECT B (EFX3/4).
fig.02-27
9. Press [F2 (STEP ->)]. You can return to the previous screen by pressing [F1 (STEP<- )].
10. Select mixer channels to be output to the AUX bus. The AUX bus is useful for creating a separate headphone mix for the
performer you are recording, or for sending tracks to an external effects processor. Use [
move the cursor and the TIME/VALUE dial to adjust each of the values.
fig.02-28
11. Press [F2 (STEP ->)]. You can return to the previous screen by pressing [F1 (STEP<- )].
114
] to move the cursor and the TIME/VALUE dial to adjust each of the values.
Cursor
Input Channel
], [ ], [
Cursor
Input Channel
Pan
Level
Track Channel
], and [ ] to move the cursor and the TIME/VALUE dial to
AUX Switch
AUX Send Switch
AUX Send Pan/
Balance
Cursor
Track Channel
Effect Switch
Send Level
Send Pan
], [ ], [ ], and [
],
] to