Roland VS-1680 User Manual page 80

Chapter 5 Using the Digital Mixer
1. Press the SELECT button for the track to which you want
to make EQ settings.
The Track SELECT button lights, and the Track Mixer
screen appears in the display.
2. Use [
], [ ], [
cursor to the EQ section of the display. Or, press [F2
(Low)]. If "Low" does not appear in the display above
[F2], press [PAGE] until "Low" appears above [F2], then
press [F2 (Low)].
3. Press [YES]. The EQ curve display appears.
4. Use [
], [ ], [
"SW" and use the TIME/VALUE dial to select "On."
5. Use [
], [ ], [
cursor to the desired EQ parameter. Use the TIME/
VALUE dial to select the desired value.
fig.03-34
Switch
Gain
Frequency
Q (definition)
Low-range
Sw (Equalizer Switch)
Turns the EQ on and off.
(Equalizer Select)
This setting selects how many bands of EQ are available.
2 Band EQ:
Low and High bands are available for 26 inputs and/
or tracks at once.
3 Band EQ:
Low, Mid, and High bands are available for 16 Inputs
and/or Tracks at once.
80
], and [ ] to move the
], and [ ] to highlight
], and [ ] to move the
Selector
High-range
Middle-range
fig.03-34c
+
EQL gain (-12–12dB)
Gain
0
-
EQL frequency (40Hz–1.5kHz)
Low
This adjusts the gain (-12 dB to +12 dB) and the shelving
frequency (40 Hz-1.5 kHz) of the low-band EQ.
Mid
This adjusts the gain (-12 dB to +12 dB), the center
frequency (200 Hz-8 kHz), and the Q (0.5-16) of the mid-
band EQ. The Mid band is not available when the 2 Band
EQ is selected.
fig.03-34a
+
Gain
0
-
EQM frequency (200Hz–8kHz)
fig.03-34b
+
Gain
0
-
HIGH
This adjusts the gain (-12 dB to +12 dB) and the shelving
frequency (500 Hz-18 kHz) of the high-band EQ.
Frequency
EQM gain
(-12–12dB)
Frequency
EQM Q
(0.5–16)
Frequency