Operation; Basic Operation 0.0.0; Tone Selection - Roland 2500s Owner's Manual

[1] OPERATION
1. Basic Operation
@ Connect the plug of the power cable to the
wall socket.
@ Turn the piano on.
* For about 2 seconds after turned on, the piano
cannot be played because of the muting circuit.
@® Adjust the volume with the Volume Control
slider.
2. Tone Selection
The Roland Piano features 8 keyboard sounds;
two acoustic grand pianos, electric grand piano,
harpsichord, clavi, vibraphone and two electric
pianos.
» To select a voice, press one of the Tone Selec-
tor buttons numbered 1 through 8. One key-
board sound can be selected at a time.
————— PIANO.
1 2 3
se ios eae ran ed
HARPSI = CLAVE VIBRA= eee PLANO creme
CHORD PHONE 1 2
ee
cl
VOICE PRESERVE FUNCTION
The Roland Piano features the Voice Preserve
Function, that is, while you are playing the key-
board using a certain voice, you can request the
next voice to be used, without the voice actually
changing until you release all the keys.
When the piano is being played with the Note or
Damper/Sostenuto ON (See next page), the voice
does not change (the indicator of the correspond-
ing sound flashes.) To change the voices, lift all
Notes and the Damper/Sostenuto OFF. (Now, the
indicator of the new voice is constantly lit.)