Turning On And Resetting The Board; Power And Reset Buttons - Intel CoreTM 2 Duo Processor User Manual

2.4

Turning On and Resetting the Board

There are two momentary switches on the CRB located in C4. One switch is the power
on switch (labeled PWR "SW4C1") and the other switch is reset (labeled RESET
"SW4C2"). These buttons are shown in
page 36.
Figure 29.

Power and Reset Buttons

Note: The power switch is also used to wake a system that is in a sleep state.
Note: Refer to section
on setup case switches and LEDs.
User's Manual
36
Section 3.6.2.3, "Front Panel Connector " on page 41
Figure 29, "Power and Reset Buttons" on
Platform Setup
for information
June 2007
Order Number: 316639-002