Table of Contents
Advertisement
Technical Reference
3.7
Jumper Block
Warning:
Do not move jumpers when the power is on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the CRB
will be damaged.
Figure 34
on page 44
Figure 34.
Jumper Block Locations and Pin Connectors
June 2007
Order Number: 316639-002
shows the location of the jumper blocks.
describes the jumper settings for the platform.
Figure 17, "Jumper Block Locations"
User's Manual
43
Advertisement
Table of Contents
Need help?
Do you have a question about the Intel CoreTM 2 Duo Processor and is the answer not in the manual?