On-Board I/O; Pci On-Board Video Chip; Floppy Drive Connector - Intel CoreTM 2 Duo Processor User Manual

Product Description
Figure 7.

PCI On-Board Video Chip

1.4.2

On-Board I/O

The following sections include all of the on-board I/O.
1.4.2.1 Serial ATA (SATA)
The CRB provides a total of six SATA interface connectors.
• Four usable SATA connectors in a SATA mode (BIOS setting) (SATA 0-3)
• Six SATA ports available in an AHCI mode (BIOS setting) (SATA 0-5)
• There are no RAID Capabilities on the chipset. Of course SW RAID is always and
option.
1.4.2.2 Serial Connector
The CRB has one 10-pin, dual-row header.
• Provides the COM3 port from the Super I/O
1.4.2.3 Floppy Drive
The CRB supplies a 34-pin, dual-row header.
• Floppy drive support comes from Super I/O
• The BIOS setup program configures the floppy drive interface
Figure 8.

Floppy Drive Connector

1.4.2.4 LPC Debug Port
The CRB includes one 60-pin card edge connector for LPC.
• Aligned with PCI connector (used for Intel Validation Only)
June 2007
Order Number: 316639-002
User's Manual
15