Roland VS-2480 Owner's Manual Addendum page 36

5—VGA Main Display Home Screen
•
•
•
•
•
The number of active FX return channels depends on how many VS8F-2 effect
expansion boards are installed in your VS-2480. See Owner's Manual Page 54.
Track Channel Meters TRACK STATUS Buttons
You can click the small button beneath a track channel meter to set the
corresponding hard disk recorder track's status—the button acts just like
a TRACK STATUS button on the VS-2480, described on Owner's Manual
Page 178.
The MONITOR and MASTER Meters
The stereo MONITOR and MASTER bus output levels are
displayed at the right of the meters strip except when the input
meters are visible.
36 www.RolandUS.com
input channel levels—signals as they come into or exit the 24 input channels.
track channel levels—signals as they come into or exit the 24 track channels.
TRACK STATUS buttons— see below
fx return channel levels—signals as they exit the VS-2480's internal effect processors.
Aux and Direct bus levels—the eight Aux and eight Direct busses.
output levels—signals as they exit the VS-2480's output jacks and connectors.
Roland VS-2480 Owner's Manual, Version Two Addendum