Multi-Channel View Fx Return Channels - Roland VS-2480 Owner's Manual Addendum

7—Mixer Views

Multi-Channel View FX Return Channels

1. ASSIGN Selector
You can click the ASSIGN selector and choose the
Aux bus that'll carry signals to the FX return
channel's effect processor.
2. EFFECT Algorithm Display
The EFFECT algorithm display shows the
corresponding effect processor's currently
selected effect algorithm. Click the display to
open the Algorithm View screen from which you
can select a different effect patch, or edit the
current patch.
3. AUX Send Sliders
Set the amount of the channel's signal sent to an Aux bus by adjusting
the corresponding AUX send slider. With linked Aux busses, a panning
handle replaces the even-numbered Aux bus's slider (Page 67).
4. DIR (DIRECT) 1-8 Selector
To route the channel's signal to a Direct bus, click the desired bus's
number.
5. MUTE (M) Button
To mute the channel, click this button so it's lit. To un-mute the channel,
click the button again.
6. SOLO (S) Button
To solo the channel, click the SOLO button to light it. To un-solo the
channel, click the button again.
8. GRP (GROUP) Selector
To assign the channel to a fader group, click beneath "GRP" and
select the desired fader group from the pop-up menu.
76 www.RolandUS.com Roland VS-2480 Owner's Manual, Version Two Addendum
228
3.
6.
5.
7.
221
230
229
142
142
228
1.
2.
4.
8.
9.
10.
11.