Effect Insert Controls - Roland VS-2480 Owner's Manual Addendum

6—VGA Main Display CH VIEW Screens
4. Filter Selector
The channel filter can be configured to remove selected
frequencies from the channel's signal in four different
modes—it can also be turned off altogether.
To learn about filters, see Owner's Manual Page 163.
5. EQ Meters
The EQ meters show the level the signal as it comes into the channel EQ and as it leaves
it.
EQ Parameters
The CH VIEW EQ parameters are described on Owner's Manual Page 165.
Filter Parameters
The CH VIEW filter parameters are described on Owner's Manual Page 164.

EFFECT INSERT Controls

Each input and track channel CH VIEW screen contains an EFFECT INSERT matrix in
which you can insert an available effect processor—or the left or right side of a
processor—into the channel's signal flow. The insert effect matrix shows each effect
inserted on the channel, as well as the signal flowing from one insert effect to the next.
The number of each processor's currently selected patch is shown in the matrix as well.
To insert an effect on a channel, click the desired processor
button repeatedly to select the type of insert routing you
want to use. To learn how each of the available routings
works, see Owner's Manual Page 217.
If a processor is already inserted elsewhere, its
processor button displays where it's being used.
To select or edit an insert effect for a processor, click the effect in the
insert effect matrix—the processor's Algorithm View screen appears
on which you can select a new patch or edit the current patch.
You can adjust the send and return levels to the inserted effect
by dragging the blue insert send and return sliders—located
to the right of the processor button—up and/or down.
60 www.RolandUS.com
Processor
buttons
Insert effect matrix
Roland VS-2480 Owner's Manual, Version Two Addendum
The icon above the selector
shows the current filter mode.
LPF
Each available effect processor has its own
processor button—in this illustration, only
two optional VS8F-2 effect expansion
boards have been installed, so Effects 7
and 8 aren't available.
Ins
This effect processor's
already being used by
Track Channel 1.
HPF BPF BEF
InsL InsR InsS
221
Insert send
Insert return slider