Track Mixer/Fx Return Mixer View; Track Channel Strips - Roland VS-2480 Owner's Manual Addendum

4. Aux Bus Master Level
Drag this knob up or down to set the master level of the Aux bus.
5. LINK
To link or un-link odd/even Aux bus pairs, click the LINK button so it lights.
When two Aux busses are linked, their appearance changes onscreen to reflect
their combined operation as shown to the right. Their Aux send sliders in the
various channel views and the track controls also change—the odd-numbered
slider sets the send level, and the even-numbered slider becomes a panning
handle that allows you to pan signals between the two linked busses.

Track Mixer/FX Return Mixer View

Select TRACK MIXER/FX RTN MIXER from the MIXER menu to view all of the
VS-2480's 24 track channel and eight FX return channel strips at once on the VGA.

Track Channel Strips

1. DYNAMICS (DYN) On/Off
Click this button to turn the channel's dynamics processor on—when
the button's lit—or off. See Page 57.
2. EQ On/Off
To turn the channel's EQ on or off, click this button. When it's lit, the
EQ's on. See Page 57.
Roland VS-2480 Owner's Manual, Version Two Addendum
Mixer view
FADER
button
indicator
Track controls
Panning
handle
Track Mixer
7—Mixer Views
FX Return Mixer
4.
6.
www.RolandUS.com
1.
2.
3.
5.
7.
8.
9.
10.
11.
67