Multi-Channel View V.fader Channels - Roland VS-2480 Owner's Manual Addendum

9. BAL (Balance) Knob
Set the stereo position of the channel in the main MASTER bus mix by
dragging the BAL knob up or down as desired.
10. Channel Fader
The position of the channel fader sets the level of signal coming out of
the channel. Moving the onscreen fader is the same as moving the
channel's physical fader on the VS-2480.
11. MONO Switch
Click the MONO switch to collapse the corresponding effect
processor's stereo output to a mono signal.

Multi-Channel View V.FADER Channels

In V.FADER mode, each channel strip's PAN/AUX SEND 1-8 knob and
channel fader can transmit MIDI Control Change values on the
corresponding MIDI channel. The V.FADER feature is described on
Owner's Manual Page 300.
1. Knob Control Change Selector
The knob Control Change selector shows the MIDI Control Change
whose values are transmitted from the VS-2480 when the channel's
PAN/AUX SEND 1-8 knob is turned. Click the selector and drag up
or down to select a different Control Change.
2. PAN AUX SEND 1-8 Knob
Drag the onscreen knob up or down—or turn the corresponding physical knob on the
VS-2480—to transmit the selected Control Change value.
3. Channel Fader Control Change Selector
The channel fader Control Change selector shows the MIDI Control Change whose
values are transmitted from the VS-2480 when the channel's fader is moved. Click the
selector and drag up or down to select a different Control Change.
4. Channel Fader
Drag the onscreen fader up or down—or move the corresponding physical fader on the
VS-2480—to transmit the selected Control Change value.
Roland VS-2480 Owner's Manual, Version Two Addendum
7—Mixer Views
www.RolandUS.com
229
230
228
1.
2.
3.
4.
77