Input/Output Control Strip - Roland VS-2480 Owner's Manual Addendum

Digital studio workstation
Hide thumbs Also See for VS-2480:
Table of Contents

Advertisement

6—VGA Main Display CH VIEW Screens

Input/Output Control Strip

The input/output control strip appears on the right side
of all of the VGA CH VIEW screens. This strip presents
parameters that allow you to control the output of the
channel strip, and meter its input or output. The
following section describes how the strip works with a
single unlinked channel. Page 53 discusses how the strip
works with linked channels.
Meters and PRE/POST Buttons
The meters allow you to view the level of signal coming
into or going out of the channel. The PRE and POST
buttons determine the signal level to be displayed. To
view the level of signal:
The CH VIEW meters are presented in pairs. With input and
track channels, you can see the levels for the odd/even pair of
channels to which the currently selected channel belongs—
there's a number beneath each meter to show the channel
signal it represents. With the stereo FX return channels, the two
meters show the left- and right-side signal levels.
SOLO Button
To isolate the channel's signal by silencing all un-soloed channels,
click SOLO so it lights. To un-solo the channel, click SOLO again.
MUTE Button
To silence the channel's signal, click MUTE so it lights. To un-mute
it, click the button again.
MIX Button
Click MIX so it lights to send the track channel's signal into the
MASTER bus, the main stereo mix. Turn it off to remove the signal
from the mix.
PAN/BAL Knob
Set the stereo placement of the channel's output in the MASTER
stereo mix by dragging its PAN knob—or BAL knob in an FX return
channel—up or down.
FADER
Drag the fader up or down to set the channel's output level—this
serves the same purpose as moving its physical fader. The readout
beneath the fader shows the channel's output level in dB.
52
www.RolandUS.com
coming into the channel—click PRE.
going out of the channel—click POST.
Roland VS-2480 Owner's Manual, Version Two Addendum
Meters
and PRE/
POST
buttons
SOLO
MUTE
MIX
PAN
FADER
154, 229
142
142
154, 230
156, 229
154, 230

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vs-2480cd

Table of Contents