Position Bar; Abs/Rel Indicator; Preview Buttons - Roland VS-2480 Owner's Manual Addendum

4—VGA Main Display Universal Elements
10. A.PUNCH
Click A.PUNCH to display the AUTO PUNCH/LOOP window in which
you can set punch in and -out points. If punch points have been set,
click this button turn on the VS-2480's Auto Punch feature.
Punch-in and -out points appear above the Home screen's playlist as red arrows. When
Auto Punch is turned on, a red bar connects the two points. See Page 44.
11. LOOP
Click LOOP to display the AUTO PUNCH/LOOP window in which you
can set loop start and end points. If the loop points have been set, click
this button to turn on looped playback of the VS-2480's hard disk
recorder.
Loop start and end points appear above the Home screen's playlist as blue arrows.
When looping is turned on, a blue loop box connects the two points. See Page 44.

12. ABS/REL Indicator

The Current Time Location display can show absolute project time
(ABS), or can shift the time to correspond to an external device to which
the VS-2480 is being synchronized (REL).
13. SCRUB
Click SCRUB to repeatedly audition a tiny fragment of audio at the
timeline's current location in order to pinpoint a recorded event.

14. PREVIEW Buttons

When you're trying to locate the precise time at which an audio event
occurs, click the appropriate PREVIEW button to listen to audio just
before and/or after the current position of the timeline.
You can also use these buttons as PROJECT TOP and PROJECT END buttons. To jump
to the top of the project, hold down SHIFT and click PREVIEW TO. To jump to the end
of the project, hold down SHIFT and click PREVIEW FROM.

15. Position Bar

Click and drag the position bar's handle to move to any location in a
project. The position of the handle shows you where you are in a project.
30 www.RolandUS.com
PREVIEW THRU
PREVIEW
TO
Handle
Roland VS-2480 Owner's Manual, Version Two Addendum
PREVIEW
FROM
192
181
316
184
183
122