Table of Contents
Advertisement
Source
>
Select the Source column with the arrow keys.
>
Press the key OK.
>
In the pop-uo window, which is now open, select the required source using the
up/down arrow keys (TV or radio).
>
Confirm with OK. Now, depending on the previously carried out setting, the TV-chan-
nel or the radio station list will be displayed.
>
You can now select the required channel with the arrow keys up/down.
>
Using the arrow keys up/down you can move the marker through the list by one
line at a time.
>
The arrow keys left/right enable scrolling through the list page-wise upwards or
downwards.
>
This is stored in the timer by pressing the OK key.
Date
>
Select the Date column with the arrow keys.
>
Enter the date (4-digit) by means of the numeric keyboard, at which the timere-
vent is to take place.
Start
>
Select the Start column with the arrow keys.
>
With the help of the numerical keyboard use this line to enter the statring time for
the Timer.
Stop
>
Repeat the steps as described in "Start" in order to enter the time to stop recording
(except for Timer for channel change).
Repeat
>
Select by means of the arrow keys the Repeat column.
>
Press the key OK. A pop/up window will appear, displaying various suggestions for
repetitions.
1x
Timer on once
T
Daily repetition
1 W
Repetition once a week
1-5
Repetition only on workdays
6-7
Repetition only on the weekend
>
Select the required function with the arrow keys up/down.
>
The setting is taken over by pressing the OK key.
Storing the data in the memory
>
After having completed the programming process, press the yellow control key
Accept in order to store the data.If you have selected a channel under Channels
which is blocked acording to Section 8.3 you must first enter the PIN number before
31
Advertisement
Table of Contents
Need help?
Do you have a question about the DigiPlus STR 1 and is the answer not in the manual?