TechniSat DigiPlus STR 1 Operating Manual page 37

With integrated conax / cryptoworks decoding system for two smart cards
Hide thumbs Also See for DigiPlus STR 1:
Table of Contents

Advertisement

>
The highlighted channel is added to the electronic programme guide by pressing the
yellow function key SFI.
>
To add several channels to the electronic programme guide you should highlight
these as described in in 8.1.2 (Block highlighting).
>
After selecting the required channels in this manner, press the yellow function key
SFI, in order to store the selected channels in the electronic channel guide.
>
Return to normal operation by pressing the Menu key.
You can now start the import procedure manually:
>
Turn the device off with the On/Standby key (Standby).
>
Now press, while the display shows "load SFI?", the key SFI. The device carries out
the import procedure. This is shown by the message load SFI followed by the dis-
play of the already imported SFI data shown on the display.
>
Select the appropriate channel and remove the child protection symbol by pressing
the yellow function key.
8.2.5 Select radio station
In the same manner as described in Section 8.2.4, you should add the radio stations to the
channel guide.
8.2.6 Start category
The electronic programme guide hasvarious representation modes (Categories).
Overview
This method of display provides you with a quick overview of all channels added to the elec-
tronic channel guide.
Channels
In this method of display, a table showing the individual daily channels will be displayed.
Genres
If you are interested in particular channel categories, you can opt for receiving channel infor-
mation sorted by particular genres, e.g. film, news, etc.
Last used
The last used representation mode is always set when calling the SFI.
>
Set the representation mode on this line with the arrow keys right/left, which should
be displayed when calling the electronic channel guide.
>
If you select Genres, you can also select the preferred genre by using the arrow keys
(e.g. film, news, show, etc.).
If you do not want to receive the additional dataor cannot receive the data due to your location,
turn the data reception option off.
>
Set Update to off, in order to turn data reception off.
37

Advertisement

Table of Contents
loading

Table of Contents