Table of Contents
Advertisement
the data can be stored.
>
Return to normal operation by pressing the TV/Radio key.
7.17.2 Timer overview
The timer overview provides you with an overview of all already programmed timer events.
>
In order to enter the menu Timer Overview activate the menu Timer
Management.
>
Use the up/down arrow keys to highlight the line Timer Overview.
>
Confirm with OK.
Overlapping timer events are highlighted in red.
7.17.3 Change Timerprogramming
>
In order to change an existing timer setting, select the timer event that you would like
to change with the arrow keys up/down.
>
Pressing the yellow function key Change brings you to the settings of the the high-
lighted timer. Modify this according to Section 7.17.1.2.
>
After you have completed the programming process, press the yellow control key
Accept in order to store the data.
7.17.4 Deleting the timer programming
>
In order to delete an existing timer setting, select it with the arrow keys up/down.
>
Press the green function key Delete. The message is displayed "You really want to
delete this timer ?"
>
Select YES with the arrow keys left/right.
>
To delete the Timers, press OK.
7.17.5 Programming a new timer event
>
Pressing the yellow function key New opens the input window to program a new
timer event. Now proceed according to Section 7.17.1 and Section 7.17.1 7.17.1.
>
Select by means of the arrow keys up/down the additionally displayed Type field.
>
Confirm with OK. A window opens to display the available timer types.
>
Use the up/down arrow keys to select therequired Timer-categoty.
>
Confirm with OK to take over the timer type.
>
After you have completed programming, please press yellow control key, to move
store the data.
Note!!!
Ensure that the device has also stored the time. This is visible on the display in the standby
mode. Should this not be the case, leave your set for instance on ZDF for a few minutes so
the time can be imported.
32
Advertisement
Table of Contents
