Change Pin; Pin Enquiry; Select Tv/ Radio Programmes; Channel Search - TechniSat digit mf4-s e Operating Instructions Manual

Hide thumbs Also See for digit mf4-s e:
Table of Contents

Advertisement

> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the line Parental control.
> Confirm by pressing OK.
The menu Parental control will be displayed.
> Use the arrow keys up/down to move the marker around within the menu, and to
change the individual positions as indicated. Please note any messages displayed on
screen when you select a menu item.

8.3.1 Change PIN

The unit PIN is set to a default setting of 0000 at the factory.
> Press the OK key. The menu used for changing the unit PIN code will be displayed.
> Now use the numeric keys to enter the current unit PIN code. (Default setting 0000)
> Use the numeric keys to enter the new unit PIN code.
> Repeat the entry.
> When you have completed changing the unit PIN code in this manner, you will
automatically be taken back to the parental control menu.
Note!
Do not forget your unit PIN code. If you do forget it at some point, please consult your retail
specialist!
8.3.2 PIN enquiry Mode
>
In this line, use the arrow keys left/right to switch the parental control On of Off
8.3.3 Select TV /Radio programmes
>
Press the OK key. The TV list of the category currently selected (Radio or TV) will be
displayed. The programme currently selected is marked.
>
Press the Opt function key to open a selection window. Here you have the option of
selecting the desired type of programme list.
Use the arrow keys up/down to select the desired type of programme list (e.g. TV
>
list).
>
Confirm by pressing OK. The programme list selected will be displayed.
>
Now use the arrow keys to mark the programme to which you wish to block access.
>
Use the yellow function key to block access to the programme. The parental control
symbol
will be displayed next to the programme selected.

8.4 Channel search

As mentioned previously, your digital receiver is pre-programmed for reception of signals from
the ASTRA and EUTELSAT satellites. To receive new programmes, or programmes from other
satellites, there are various options for performing a programme scan.
36

Advertisement

Table of Contents
loading

Table of Contents