Exit Sfi; Timer Recordings - TechniSat DigiPlus STR 1 Operating Manual

> Select the required programme on so itcategories with the arrow keys up/down
and acknowledge with OK. The daily overview now exclusively displays programmes
of the selected programme type.
> Using the arrow keys up/down, you can now set the marker to the required chan-
nel.
> Using the right/left arrow keys you can scroll on by page.
The individual days of the week are displayed on the lower edge of the screen.
If information is available for these days, the relevant fields are marked.
> To display the content of a programme on a particular day, press the digit correspon-
ding to the weekday on the numerical keyboard.
7.16.8 Terminating SFI
> Return to normal operation by pressing the Menu or TV/Radio key.
7.17 Timer redordings
Your receiver is equipped with the video recorder timer and a station change timer. These
timers only differ with regard to programming by indication of the appropriate timer type.
You can channel the timer either manually as described in this chapter or as explained in
Section 7.16.7.2 by means of the SFI function.
1. Video recorder-timer
Your digital receiver is activated or deactivated by the video recorder timer, in order to record
a channel on a recording device in your absence, e.g. on a video recorder. Please oibserve
that you have to program your video recorder in order to record a programme.
If the set was activated by the video recorder-timer this would be shown on the display as
"VCR Timer". Most of the remote control functions are deactivated, to prevent accidental
aborting of the recording. The active timer is indicated by the flashing of the two dots in the
time display or LED in the standby mode.
2. Station change-timer
If your set is in normal mode, it will tune in to the programmed programme position when the
programme time has arrive. The device can be used as usual and is not turned off when the
programme has finished, in contrast to the settings of the video recorder timer.
7.17.1 Manually programming the timer
> Call the Main menu with the Menu key.
> Select the the Timer administration line with the arrow keys up/down.
> Confirm by pressing the OK key. The Timer administration submenu is displayed.
> Select the timer type with the arrow keys up/down, which zou would like to use
for programming.
> Pressing the OK key returns you to the input window for programming a new timer
event.
Proceed as follows to program:
30