Multi-Station Appearance; Answeringa Call - Fujitsu CT-10 User Manual

MULTI-STATION APPEARANCE
The Multi-Station Appearance feature allows for the same extension
number to appear on up to sixteen CT-1 0, CT-20, or CT-30 telephones.
Each telephone is assigned
a
specific extensions number referred to as
a Prime Station Line (PSL). All other extension numbers appearing on
that telephone are referred to as Other Station Lines (OSL). Calls may
be placed and answered from any of the extension lines (PSLs or OSLs)
that appear on your telephone. To activate a feature from your
extension, you can use the PSL or any OSL.
ANSWERING A CALL
To answer a call using a PSL button:
1. Listen for extension ringing tone.
- Your PSL lamp flashes in the slow pattern.
- Corresponding OSL lamps flash at other extensions.
2. Lift the handset.
-or-
Press the flashing red
PSL
button.
- The PSL lamp t7ashes green in the interrupted patfern.
- Conversation begins.
- The corresponding OSL lamps af ofher extensions light red in a
steady pattern.
3. Hang up when the call is completed.
- Your PSL lamp goes dark.
- Corresponding OSL lamps go dark.
To answer a call using an OSL button:
1. Listen for extension ringing when a call arrives at your
OSL.
- Your ringing OSL /amp tlashes in a slow pattern.
- The corresponding lamps at other extensions flash.
2. Lift the handset.
3. Press the flashing red
OSL
button.
4. Conversation begins.
- Your OSL lamp flashes in fhe interrupted pattern.
- Coiresponding lamps at other extensions light in the
steady pattern.
5. Hang up when the call is completed.
- Your OSL lamp goes dark.
- Coriesponding /amps at other extensions go dark.
25