Message Leaving - Fujitsu CT-10 User Manual

MESSAGE LEAWNG
If you return to your office and find your message pick-up iamp on, you
can have as many as four messages waiting.
To return the calls:
1. Lift the handset.
- You hear dial tone.
2. Press the message pick-up button.
- The number of the first extension which left a mesS8ge is
automatically dialed.
- When the extensjon being called answers, the message pick-up
lamp goes dark unless another message is waiting.
If additional messages are waiting, repeat the steps above to reiurh
those calls.
NOTES
_ _ _.
1. If the person who left the message does not answer or the
extension is busy, the message'pick-up lamp remains lit and you
may try again later.
2. If you return a call and reach a forwarded-to destination instead of
the actual extension which left the message, the message is still
canceled because you returned the call.
3. If you place a call to another extension (not one which left a
message for you) and that call is forwarded to an extension which
left a message for you, the message pick-up lamp remains tit
because the call was unintentionally returned. You must call the
other extension directly. Use the message pick-up button to
cancel that message.
62