Forced Account Code - Fujitsu CT-10 User Manual

FORCED ACCOUNT CODE
If the system is programmed for Forced Account Code, you MUST enter
an account code for all outside calls, except those placed using a line
button. If the system verifies account codes, you must enter a valid
account code.
To enter a Forced Account Code using a programmable feature
button:
1. Lift the handset.
- Listen for dial tone.
2. Originate a CO/tie line call.
- System generates key tone and displays ACCT.
- The account code lamp lights.
3. Dial the account code (up to fifteen digits).
4. Press the account code button.
- Listen for dial tone from CO or tie.
- You can now dial the destination number.
To enter a Forced Account Code if you do not have a
programmable feature button:
1. Lift the handset.
- You hear dial tone.
2. Dial the code for an outside line or tie line.
- The system generates rapid dial tone.
3. Dial the account code (up to fifteen digits).
4. Listen for outside dial tone.
- You can now dial the destination number.
109