Auto Lcr Camp-On - Fujitsu CT-10 User Manual

Auto LCR Camp-On
When automatic LCR Camp-On is active after dialing the LCR code
and the destination directory number:
1. Listen for the distinctive busy tone.
2. You have the following options:
l
Manually camp-on.
l
Hang up.
l
Remain off-hook and the system automatically activates the LCR
Camp-On after a predetermined time; CAMP-ON displays.
3. Wait on- or off-hook for an available trunk. If no trunk becomes
available within specific time, the system expands the COS to allow
a wider range of available trunks.
- For an on-hook state, callback to extension occurs when a trunk is
available.
Lift the handset at the callback and the system will dial
the destination directory number.
- For off-hook state, hold tone is received until the hunk is available
(if the system flag is so programmed). When the trunk is
available, the system will dial the destination directory number.
LCR Warning Bursts:
l
One of two LCR warning burst tones can be programmed to notify
the caller of routing selection:
- One tone notifies the caller that the most expensive route is being
used.
- Anofher tone notifies the caller that a route other than the least
cost route is being used.
53