Privacy Release - Fujitsu CT-10 User Manual

PRIVACY RELEASE
Privacy Release lets you override the privacy feature inherent in your
telephone system. A third party can then enter your two-way
conversation. The third party must have the same extension
appearance on their telephone as the one you are using at the time.
You must have a programmable
privacy release
button to activate this
feature.
To activate Privacy Release during a two-way conversation:
1. Instruct the third party to prepare to enter conversation.
2.
Press the
privacy release
button.
-
The
privacy release
lamp lights in the steady pattern.
- Your
line
lamp
flashes
in the interrupted pattern.
- Corresponding
line
lamps flash in the slow pattern.
3. Conversation can begin when the third party presses the
line
button.
-
The
privacy release
lamp goes dark.
- The corresponding /amps at the third
party's
extension
flash in
the
interrupted pattern.
- The corresponding /amps at all extensions, other than the two
connected to the outside
pady,
light in the steady pattern.
To cancel Privacy Release:
l
Press the
privacy release
button before the third party enters the
conversation.
- Your
line
lamp flashes in the interrupted pattern.
- Corresponding lamps at all other extensions light in a steady
pattern.
NOTE
When your telephone is in the privacy release state, you cannot
activate other features, such as Transfer, Camp-On, etc.
29