Three-Party Conference - Fujitsu CT-10 User Manual

THREE-PARTY CONlFERENCE
While engaged in a two-way conversation, you can add one additional
internal or external party to your conversation.
To set up a Three-Party Conference with another extension or an
outside party:
1. Ask the party to wait.
2. Press the TRANSFER button.
- The TRANSFER lamp lights in a steady pattern.
- listen for key tone.
3. Dial the desired number.
- Privately announce tile conference call when the called party
answers.
4. Press the TRANSFER button.
- The ?RANSFER lamp remains in fhe sfeady light pattern.
- A three-party conference is established.
To reconnect to the original party in the case of a dialing error or if
the extension you are calking is busy or does not answer:
o Press the TRANSFER button.
- The TRANSFER lamp goes dark.
- You reconnect with the original party.
NOTES
1. Should one party disconnect, a two-way conversation can continue if
one of the parties is an internal extension.
2. If an inside party does not want to be included in the conference, wait
for the party to hang up. You automatically reconnect to the original
Party.
3. If an outside party does not want to be included in the conference, wait
for the party to hang up. If you do not automatically reconnect with the
original party, press the TRANSFER button twice.
4. DTMF tones may be sent during a conference call by the
extension that originated the call only. The key pads of the other
extensions involved in the conference will be disabled, even if the
conference originator hangs up.
80