Fujitsu CT-10 User Manual page 66

DO NOT DISTURB
(Cont'd)
To cancel Do Not Disturb:
.
Lift the handset.
- You hear dial tone.
If you have a DNQ button:
.
Press the DND button.
- The DND lamp goes dark.
If you do not have a DND button:
.
Dial # 6.
- Listen for success tone.
NOTE
1. The primary answering position where your extension number
appears receives the interrupted flash pattern. This indicates that
you have implemented Do Not Disturb. You can override Do Not
Disturb from a primary answering position if necessary.
2. When Do Not Disturb is in effect, you hear the key tone when
you lift the handset. This tone reminds you that your extension
cannot receive any calls.
3. If you want the primary answering position to be able to override
Do Not Disturb when it is implemented at your extension, you
must designate that extension number for Do Not Disturb
Override.
56