System Tones - Fujitsu CT-10 User Manual

Busy Tone
Call Waiting Tone
Camp-On Tone
Distinctive Busy
Tone
Error Tone
External Dial Tone
SYSTEM TONES
A continuous standard busy signal with tones of
equal length.
A single burst of tone heard during conversation
indicating that an external call is waiting to be
answered.
A single burst of tone heard during conversation
indicating that an extension has camped-on to
your extension.
A continuous short-long busy signal which sounds
when you reach a busy extension or outside line
and are allowed to camp-on.
A fast busy tone. If you receive an error tone after
requesting a feature, one of the following
conditions may exist:
* Your telephone is not allowed to implement
the feature you requested.
l
You dialed an incorrect feature code or
number.
Press TRANSFER to connect with your original
party and try again, or proceed with another
feature.
This is a continuous tone obtained when you:
l
Press an outside line button.
l
Lift your handset and press an outside line
button.
o Dial a code (usually 9) to access an outside
telephone network.
This dial tone indicates that you can place an
external call. External dial tone is not heard if the
tone is not provided by the local telephone
network.