Speed Calling - Extension - Fujitsu CT-10 User Manual

SPEED CALLING - EXTENSION
Speed Calling - Extension lets you establish a personal directory of up to
ten frequently called outside numbers consisting of up to fifteen to
twenty digits each. A single-digit code (O-9) is assigned to each entry in
the ten-member list. The assigned number is your entry code.
To program or change a number in your Extension Speed Call
Directory:
1. Refer to your directory for the desired entry code.
2. Lift the handset.
- Listen for dial tone.
3. Dial # 0.
4. Dial the entry code (O-9).
5. Dial the code for an outside line and the outside number.
- Listen for the success tone.
NOTE
If a pause is required anywhere within the number for return dial
tone, enter a # for each pause needed.
6. Hang up.
- Repeat the above steps for each of the remaining entry codes until
all numbers are programmed.
88