Fujitsu CT-10 User Manual page 74

ING...Using Message Pick-Up (Cont'd)
If you do not have a message pick-up button or do not need to call
the extension where you want to leave a message:
1. Lift the handset.
- You hear dial tone.
2. Dial*l.
3. Dial the number of the extension where you wish to leave a
message.
- The dialed extension does not ring.
4. Dial the Silent Message ID (if system has this feature).
- Listen for success tone.
- The message pick-up lamp or message waiting lamp
lights steadily at the dialed extension.
5. Hang up.
NOTE
If you leave a message at another extension that has any Call
Forwarding feature or Do Not Disturb in effect, the message pick-up
lamp or message waiting lamp lights at the extension that you dial,
not at the forwarded-to extension.
To cancel a message previously left at another extension:
1. Lift the handset.
- Listen for dial tone.
2. Dial#l.
3. Dial the extension number where the message was left.
- Listen for success tone.
- The message pick-up lamp or message waiting lamp
lights steadily at the dialed extension.
4. Hang up.
To cancel all messages at your own extension:
1. Lift the handset.
- Listen for internal dial tone.
2. Diald#d.
3. Dial 0.
- Listen for success tone.
- The message pick-up lamp on your telephone goes dark when
the messages are canceled.
4. Hang up.
64