Silent Message - Fujitsu CT-10 User Manual

SILENT MESSAGE.. .
Using DND Silent MSG
To leave a Silent Message response for incoming calls if you have
a DND Silent MSG button:
1. Lift the handset.
- Listen for internal dial tone.
2. Press the DND silent MSG button.
- The DND silent MSG damp lights steadily.
3.
Dial the Silent Message ID.
- Listen for success tone.
4.
Hang up.
NOTE
When using the DND silent MSG, Silent Message is in effect. You
hear key tone whenever you lift the handset. Key tone reminds you
that your extension cannot receive any calls.
To leave a Silent Message response for incoming calls if you do
not have a DND silent MS6 button:
1. Lift the handset.
- Listen for internal Uial tone.
2. Dial * 6.
3. Dial the Silent Message ID.
- Listen for the success tone.
4. Hang up.
- When your extension receives an incoming call, the message and
its accompanying extension number appears on the display of the
calling extension and busy tone sounds.
NOTE
ASilent Message ID is a two-digit number programmed into your
system. See the list of programmed messages and IDS at the end of
this section.
74