Initial Assembly
Your Hybrid Fire Grill does not require any major assembly, but some pieces
are wrapped individually to prevent shipping damage.
A.
Place the warming rack above the rotisserie
burner(s). The end with the dog leg bend should
be toward the front right side of the grill.
B.
See page 23 for rotisserie rod installation
instructions.
C.
Place the primary cooking grates in the grill.
D.
Insert the Hybrid Fire Grilling Drawer.
E.
If not already on the unit, mount the CONTROL
KNOBS on the valve posts.
F.
Place the ash bin in the cabinet, seated between
the posts mounted in the floor.
WARNING:
Never touch or empty the ash bin
when the grill is hot. Always wait at least 24 hours
before emptying the ash bin.
B
C
D
E
1.800.868.1699
A
F
G.
Place the LP cylinder (HS LP models only) in the
side cabinet and secure with the chain.
H.
Place the cooktop burner diffusion caps on the
cooktop burners.
I.
If not already on the unit, mount the cooktop
CONTROL KNOBS on the valve posts.
J.
Place the cooktop burner grid on the cooktop
burner tray.
K.
Place the cooktop cover over the cooktop.
FIGURE 6
I
K
J
H
G
21