To Adjust Burner Low Settings (All Burners) - Kalamazoo Outdoor Gourmet K500HB Use And Care Manual

FIGURE 25
B
C
A
Too much air may cause the flames to "lift off" the burner. This is a dangerous condition that must be avoided.
Do not open the air shutter too far. Too much air will also make it more difficult to light the burner. You may
test burn the grill to fine-tune the air shutter. Light only the burner to be adjusted and fine-tune the air shutter.
Adjustments should be made with the burner on HIGH.
Once adjusted to a stable flame that burns cleanly and does not lift, turn the burner OFF. Tighten the lock
screw.

To Adjust Burner LOW Settings (All Burners):

The low setting on the main burners can be adjusted WITHOUT removing the
control panel. A long and thin flat-blade screw driver is needed to make the
adjustments. Light the burner and set it to LOW.
Remove the control knob and insert the screw driver into the opening in the center
of the valve stem (see Figure 24:C page 35 and Figure 26). Turn the adjustment
A
screw (see Figure 26:A) until the flame on the burner is the minimum stable flame
height. The flame should be steady at all ports around the burner. The flame
should not be easily blown out without quickly reestablishing itself.
FIGURE 26
36 www.KalamazooGourmet.com