Front I/O assembly
Description
Front I/O assembly
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Rotate the drive cage to its upright position.
5.
Disconnect the cables from the system board as follows:
Yellow connector labeled FRONT_USB
Black connector labeled MEDIA 3.0
Blue connector labeled FRONT AUD
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page
87).
86).
Spare part number
732755-001
85).
Front I/O assembly
121