Lithium Coin Cell Battery; Sata Hard Drives - HP ProDesk 600 G1 Maintenance And Service Manual

If you are inserting or removing a hard drive, turn off the computer. Do not remove a hard drive
while the computer is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a
drive, avoid touching the connector. For more information about preventing electrostatic damage,
refer to
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic
fields such as monitors or speakers.

Lithium coin cell battery

The battery that comes with the computer provides power to the real-time clock and has a minimum
lifetime of about three years.
See the appropriate removal and replacement chapter for the chassis you are working on in this guide
for instructions on the replacement procedures.
WARNING!
battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, dispose in
water or fire, or expose it to temperatures higher than 140ºF (60ºC). Do not attempt to recharge the
battery.
NOTE: Batteries, battery packs, and accumulators should not be disposed of together with the
general household waste. In order to forward them to recycling or proper disposal, please use the
public collection system or return them to HP, their authorized partners, or their agents.

SATA hard drives

Serial ATA Hard Drive Characteristics
Number of pins/conductors in data cable
Number of pins in power cable
Maximum data cable length
Data interface voltage differential
Drive voltages
Jumpers for configuring drive
Data transfer rate
Electrostatic discharge information on page 28
This computer contains a lithium battery. There is a risk of fire and chemical burn if the
7/7
15
39.37 in (100 cm)
400-700 mV
3.3 V, 5 V, 12 V
N/A
3.0 Gb/s
SATA hard drives
35