HP ProDesk 600 G1 Maintenance And Service Manual page 114
Tower/small form factor
Hide thumbs
Also See for ProDesk 600 G1:
- Maintenance and service manual (243 pages) ,
- Disassembly instructions manual (9 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
6.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place.
7.
If installing a USB 3.0 media card reader, you must use the USB 3.0 to USB 2.0 adapter and
connect the adapter cable from the media card reader to the USB 2.0 connector on the system
board labeled MEDIA.
NOTE:
drive connectors.
8.
Rotate the drive cage back down to its normal position.
CAUTION:
104
Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
Refer to
System board connections on page 98
Be careful not to pinch any cables or wires when rotating the drive cage down.
for an illustration of the system board
Hide quick links:
Advertisement
Table of Contents
