Processor - HP ProDesk 600 G1 Maintenance And Service Manual

5. Disconnect the fan cable from the system board connector labeled CPUFAN (1), and then lift the
heat sink from atop the processor (2).
When reinstalling the fan sink, make sure that its bottom has been cleaned with an alcohol wipe and
fresh thermal grease has been applied to the top of the processor.
CAUTION:
evenly seat the fan sink on the processor to avoid damage that could require replacing the system
board.
Make sure to replace the fan duct. Failure to install the fan duct may cause the computer to overheat.

Processor

Description
Intel Core i7 processor
4770, 3.4 GHz, 8-MB L3 cache, 86W
Intel Core i5 processors
4670, 3.4 GHz, 6-MB L3 cache, 86W
4570, 3.2 GHz, 6-MB L3 cache, 86W
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the fan duct
4. Remove the fan sink
Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to
(Access panel on page
(Fan duct on page
(Fan sink on page
(Preparation for disassembly on page
86).
115).
126).
Spare part number
727373-001
727381-001
727380-001
85).
Processor
127