Paper path
Do c u Co lo r 50 0 0A P U s e r G u i de
TIP: Labels must be sent to the HCS Top Tray.
.
Top Tray
Sheets are transported to the HCS Top Tray:
•
When sheets are purged after a paper jam.
•
When the Sample Set button is selected.
•
When selected as an Output Location.
Stacker Tray
Collated sets are transported to the HCS Stacker Tray.
Bypass
The Bypass transports collated sets through the HCS to a
connected finishing device or to another HCS.
If your system configuration has two High Capacity Stackers, the
bypass on the second HCS is not available.
4. A c c es s o r i e s
4-9