Table of Contents
Advertisement
4. A c c e s s or ie s
Identifying the parts
Item
Name
Number
1
Ready light
2
Sample set
button
3
Unload
button
4
Unload light
5
Wait light
6
Fault code
display
7
Top tray jam
area
8
Bypass jam
area
9
Stacker tray
jam area
Not
Keypad
applicable
(not shown)
4- 6
Control panel
The Ready light blinks during initialization and is constant when the HCS is in
use or in standby mode.
Press to have the HCS deliver the next collated set to the top tray.
Press once to lower the Stacker Tray and unlock the front door. If pressed
while running a job, all sheets in the paper path are delivered before the
Stacker Tray starts to lower.
Illuminates when the Stacker Tray has reached the down position and the
front door can be opened.
Blinks when the Stacker Tray is moving up or down.
Displays a code when a fault occurs in the stacker. Refer to the HCS fault
code table located in the Problem Solving section of this chapter.
Blinks when there is a jam.
Illuminates when output is sent to the tray.
Blinks when there is a jam.
Blinks when there is a jam or the door is open.
Illuminates when output is sent to the tray.
Used by the service representative for diagnostics. The keypad is located on
the front right of the control panel.
Function
Do c uC o lo r 50 0 0A P Us e r G ui d e
Advertisement
Table of Contents
