Table of Contents
Advertisement
Dry Ink/Toner status area
Do c u Co lo r 50 0 0A P U s e r G u i de
Pause
Selecting the Pause button during a print job stops or pauses the
printing process. Once a print job is paused, you may choose
either:
•
Resume: Selecting this option resumes the print job from the
point it was paused.
•
Cancel Job: Selecting this option displays a secondary
window asking the user if they want to cancel the print job.
•
Selecting Yes cancels the printing process.
•
Selecting No closes the Confirm Cancel Job window and
returns the machine to the paused state. You must select
Resume to continue the printing process.
NOTE: Depending on the Administrator setting, your machine
may automatically resume printing after a preset period of time
without selecting the Resume button. Ask your Administrator
about this or refer to Chapter 2 of the Administrator Guide for
more information.
This area of the UI displays the status of the dry ink/toner
cartridges with a gauge indicating the level/amount of toner for
each cartridge. As toner is used, the display continually updates
the gauge for each toner cartridge.
For example, the gauges for the dry ink/toner cartridges indicate
the amount of toner in each cartridge:
•
The cartridge is 100% full when all four bars are filled with its
appropriate color (as indicated in the illustration with Yellow).
•
The cartridge is 75% full when three bars filled (as shown with
Cyan).
•
The cartridge is 50% full when two bars are filled in (as shown
with Magenta and Black 2).
•
The cartridge 25% full when one bar is filled in (as shown with
Black 1).
1. O v e r v ie w
1-19
Advertisement
Table of Contents
