Table of Contents
Advertisement
7. M a i nt en a nc e
7- 4
•
Continue to rotate and wipe the belts until all the belts are
clean.
6.
Clean the areas between each belt by wiping them with a
lint-free cloth.
NOTE: It is recommended that you use the lint-free cloth supplied
with your digital press, Xerox part number 19K03610.
7.
Clean the sensors (circled below) with a lint-free cloth.
8.
Grasp handle 4 and slowly push in the Paper Transport until
it stops. Turn the handle in the direction of the arrow to lock
the module in place.
Do c uC o lo r 50 0 0A P Us e r G ui d e
Advertisement
Table of Contents
