2. Tr ay P r op e r ti e s
2- 6
2.
From the Decurler Profile menu, select the Decurler Profile
that you want to use and then select OK.
NOTE: If a Decurler profile is changed, it remains at that setting
until changed again manually. As an example, if you decide to use
the B Decurler setting, the setting will remain at B until you change
it to another setting.
NOTE: With some print jobs, the output prints still may be curled
more than you desire even after using the Decurler A-D Settings.
In those cases, use the Custom Decurler Profile feature to
compensate for paper curl in your prints. For additional
information on the Decurler and the step-by-step instructions on
using it, Chapter 3 of the Administrator Guide, which is located on
your Customer Documentation CD or at www.xerox.com.
Alignment Profile
This area of the screen allows you to select a specific alignment
profile or the system default from the pull-down menu.
Refer to the Administrator Guide for more detailed information on
each of the Profiles features.
Do c uC o lo r 50 0 0A P Us e r G ui d e