4. A c c e s s or ie s
Paper path
SFM Transport Area
Tray 3
Tray 4
Paper guidelines
4- 2
Paper feeds from the right side of the trays. Sheets move from the
transport area behind the right door of the SFM to the Upper
Transport area above Paper Trays 1 and 2, then through the
Transport Module and into the press.
Upper Transport Area
Tray 1
Tray 2
For the best results, remember the following:
•
Do not load paper or other materials above the MAX line on
the rear paper guide.
•
Do not store extra reams of paper in the paper trays.
•
Do not use wrinkled, torn, curled, or folded paper.
•
Use the paper sizes and weights shown in the Recommended
Materials List.
•
Follow the suggestions in the Specialty Media Guide: Hints
and Tips.
•
Do not mix sizes or weights of paper in a paper tray.
•
Ensure that the tray is set for the correct paper size, weight
range, and paper type.
NOTE: It is imperative that you load paper with the paper guides
adjusted properly. If the paper is NOT loaded properly, it will skew
and jams will occur.
Transport Module
Do c uC o lo r 50 0 0A P Us e r G ui d e