Cleaning procedures
Cleaning the digital press
Cleaning the UI screen
Do c u Co lo r 50 0 0A P U s e r G u i de
7.
Maintenance
This chapter describes the procedures necessary for maintaining
optimal operating reliability for your machine.
For troubleshooting problems, refer to "Problem solving" on
page 5-1. Unresolved problems need to be referred to your Xerox
service representative. Use the procedure in this section when it
becomes necessary to request a service call.
The procedure for ordering supplies and a list of the supplies you
should keep on-hand are also included in this chapter.
If the exterior surfaces require cleaning, dampen a paper towel or
a soft, clean cloth with a liquid, nonabrasive glass cleaner or
water.
WARNING: Do not use any other cleaners or solvents on the
digital press as they may interact with the paint on the covers,
eventually causing the paint to peel.
WARNING: DO NOT pour or spray liquid directly into any of the
paper trays. Always apply the liquid to the cloth first.
Clean the UI screen at the start of each day. Remove all dust and
fingerprints by wiping the screen with a clean, lint-free cloth.
CAUTION: To avoid damage, do not use any Xerox cleaner,
water, or commercial cleaner on the screen.
7-1