Security Labs PTZ IP Camera User Manual page 28

"IP Address"
This item determines the IP Camera's IP Address.
"Subnet Mask"
This item sets the IP Camera's Subnet Mask. The value is normally 255.255.255.0
"Gateway"
This item sets the IP Camera's Gateway address.
"Obtain an IP address"
This allows you to choose either to set the IP Camera's IP Address manually or via
DHCP. The IP Camera will reboot after the above settings have been changed.
ii. DNS Server IP
"Primary DNS Server IP"
This item sets the IP Camera primary DNS Server IP address.
"Secondary DNS Server IP"
This item sets the IP Camera secondary DNS Server IP address. T he IP Camera
will use the secondary DNS Server IP address if the Primary DNS Server IP
address is not working.
iii. Port Number
"HTTP Port Number"
By default the port number is 80
"Communication to Camera Port Number"
By default the port number is 9001
iv. Ethernet
IP Camera Manual
Fig.21 IP Camera IP Address Settings
Fig.22 IP Camera IP DNS Server IP
Fig.23 IP Camera Port Settings
Fig.24 IP Camera Ethernet Settings
24