Security Labs PTZ IP Camera User Manual page 56

The IP Camera requires that TCP Port 80 and UDP 9001 (default settings) be opened
to the Internet. TCP Port 80 is used for accessing the camera's homepage and UDP Port
9001 is used for authentication and video streaming.
If your Internet Service
reconfigure your camera and router to other ports such as 81/9002, 82/9003, etc. To
change the port settings on the camera, you'll need to use Netility.
Follow the steps below to configure your router, depending on the router manufacturer
and model. If your particular router manufacturer or model is not listed below, please
contact your router manufacturer for further assistance in configuring your router.
The Following Router manufacturers and models are included in this document:
Brand Model
3Com 3C857-US
3CRWE52196
Belkin F5D6230-3
F5D7230-4– 54g
D-Link DI-604/DI–614+/DI-624
DI-704/704P
DI714
DI-714P+
Dell TrueMobile
Broadband Router
Linksys BEFSR41
BEFSX41
BEFW11S4
Microsoft MN-100
MN-500
NETGEAR RP614
MR814
MR314
FVS318
Proxim ORiNOCO
Broadband Gateway
Siemens SpeedStream 2602
SpeedStream 2623
IP Camera Manual
Provider (ISP) blocks
Description
OfficeConnect Cable/DSL Gateway
OfficeConnect
Gateway
Wireless Cable/DSL Gateway Router
Wireless DSL/Cable gateway Router
-
-
-
-
2300 Wireless -
EtherFast Cable/DSL Router
Instant Broadband EtherFast Cable/DSL
Firewall
Switch/VPN EndPoint
Wireless Access Point Router with 4-Port
Switch – Version 2
Wired Base Station
Wireless Base Station
Web Safe Router
Wireless Router
Cable/DSL Wireless Router
ProSafe VPN Firewall
BG-2000 -
2-Port DSL/Cable Router
Wireless DSL/Cable Router
port 80/9001, you'll need to
Wireless
Router with
Cable/DSL
4-Port
48