Security Labs PTZ IP Camera User Manual page 63

FVS318 – ProSafe VPN Firewall
1. Log into your router.
2. On the main page, click on Add Service on the left side of the screen.
3. Click Add Customer Service.
4. In the Name field enter a name for the camera, for example: IP Camera Web:
Type: TCP
Start Port: 81
Finish Port: 81
5. Click Apply to save the settings.
6. There is a bug in the NETGEAR FVS318 1.4 firmware that does not record
any entry that uses port 80. If you intend to use port 80, you will initially need to
enter 81 for the Start and Finish port, and then edit the entry to port back to 80.
Click on Add Service on the left side of the screen.
7. In the Service Table window select IP Camera Web and click Edit Service.
8. Change the Start and Finish port to 80. Click Apply.
9. On the main page, click on Add Service on the left side of the screen and
then click Add Custom Service. In the Name field enter a name for the camera,
for example: IP Camera Cam.
Type: UDP
Start Port: 9001
Finish Port: 9001
10. Click Apply to save the settings.
11. On the main page, click on Ports at the side of the screen.
A. Click Add.
B. For Service Name select: IP Camera Web
C. Action: ALLOW always
D. Local Server Address: Enter the IP address of the camera
E. WAN Users Address: Any
F. Click Apply.
12. Click Add again.
A. For Service name select: IP Camera Cam
B. Action: ALLOW always
C. Local Server Address: Enter the IP address of the camera
D. WAN Users Address: Any
E. Click Apply.
13. Exit the router setup program. IP Camera should now be configured to work
with your router and be accessible from the internet.
Proxim (http://www.proxim.com)
IP Camera Manual 55